Home/Support/Support Forum/configuration with 12 xbees

configuration with 12 xbees

0 votes
I want to create a network of 12 Xbee clients and 1 server that gets all information from all of them.
What I understood I have to put a "router" in the middle to split in two the network,
1 server -> 1 router -> 6 xbee
-> 1 router -> 6 xbee
Am I wrong?

Also I would like to send the result of one pin that is going to be 0 or 1 ( push button ).
When these devices are sending these information, there is a way to detect which was the client? Like client number 1 sent HIGH, client number 2 sent LOW, etc...

I did some research and I understood that sending the HIGH and LOW is possible but I just need these two clarification :)
asked Jul 11, 2013 in XCTU by max246 New to the Community (0 points)

Please log in or register to answer this question.

1 Answer

0 votes
Digi's 802.15.4 products can do line passing:
http://www.digi.com/support/kbase/kbaseresultdetl?id=3222

I'm not sure how to do it with series 2 radios though however.
answered Sep 29, 2013 by kjensen8 Veteran of the Digi Community (623 points)
...