Home/Support/Support Forum/AnywhereUSB / 14 every week to become inaccessible.
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

AnywhereUSB / 14 every week to become inaccessible.

0 votes
Good afternoon.
Approximately 1-1.5 weeks you are not available on the network at configured IP Network failover. It helps only physical device reboot. What to do? (When sewing factory and features below)
Code:
Model: AnywhereUSB/14 Ethernet MAC Address: 00:40:9D:80:5C:9A Firmware Version: 1.81.15.70 (build 82002081_L1 awusb14 eos 1/26/2015 5:30:35p) Boot Version: 1.09.10.6 (release 82002082_B awusb14 bootloader 11/09/2009) POST Version: 1.09.9.39 (release 82001552_A generic_travis hwdiag 11/09/2009) Product VPD Version: none Product ID: 0x0121 Hardware Strapping: 0x0000 CPU Utilization: 3% Up Time: 1 day 20 hours 5 minutes 38 seconds Total Memory: 131072 KB Used Memory: 25751 KB Free Memory: 105321 KB
asked Aug 11, 2015 in Other/Legacy by Raven2000 New to the Community (0 points)

Please log in or register to answer this question.

2 Answers

0 votes
Could be this issue, might want to look into the knowledgebase articles if this one doesn't address your issue

http://knowledge.digi.com/articles/Knowledge_Base_Article/AnywhereUSB-disconnects-from-host-computer-and-hangs-re-connecting
answered Sep 23, 2015 by Campbell Veteran of the Digi Community (552 points)
0 votes
1. Update the firmware to the current version (1.82).

2. Disable the RealPort service if you aren't using the serial port.

Does the problem still happen afterwards?
answered Sep 25, 2015 by jeremym Veteran of the Digi Community (1,673 points)
...